Built-in Wi-Fi Settings

At the Wi-Fi Settings page of the LTE Manager, you can change the following settings of the LTE system's built-in Wi-Fi:

• Built-in Wi-Fi: Set to "Off" if you want to disable the built-in Wi-Fi. You might do this if you're using your own wireless router.
• SSID (Wi-Fi Network Name): Assign a unique name to the LTE system's Wi-Fi network. Mobile devices will identify the network by this name.
• Security Mode: Select "WPA2-PSK" to secure the Wi-Fi network. Select "Open" only if you want anyone within range of the Wi-Fi to have uncontrolled access to your network.
• Password: If you selected WPA2-PSK security, enter a password that is 8-20 characters in length. Users will need to enter this password to connect a device to the Wi-Fi network.

IMPORTANT! Failure to apply a security mode and unique password will make your vessel’s wireless network vulnerable to outside intrusion.

Be sure to save your changes.

Note: The default network name and password are provided on a label in the Quick Start Guide and inside the antenna dome.