Advanced Network Settings

IMPORTANT! The default network settings work well for most installations. Do not change them unless absolutely necessary.

Changing the IP Address

By default, the LTE system's built-in router has an IP address of 192.168.55.1. If this configuration conflicts with an existing onboard network (e.g., another router on the vessel is using the same address), you can change the IP address of either your vessel's router or the LTE system's router. To change the IP address of the LTE system's router, log into the LTE Manager, select Network Configuration, then enter the desired IP address. Save your changes.

Disabling DHCP to Manually Set IPs

By default, the LTE system's built-in router assigns IP addresses to connected devices automatically. If you prefer to manually assign static IP addresses to your devices, you can turn off the LTE system's DHCP server. Log into the LTE Manager, select Network Configuration, then set DHCP to "Off." Save your changes. Once you make this change, you will need to enter a valid IP address in the network settings of each device you want to use with the LTE system. For example, if the LTE system's router is set to the default IP address of 192.168.55.1 and subnet mask of 255.255.255.0, you must set each device to any unique IP address ranging from 192.168.55.2 to 192.168.55.254.

Note: Only one router can be the DHCP server on a single network.